一.適用:
適用于鞋材、棉、萊卡、牛仔、尼龍、TPU、PU皮革等。
二.外觀及組成:
外觀:白(乳白)狀粘稠體
主成分:特殊樹脂,鈦白粉
PH值7—8
布氏粘度:160000-180000CPS
離子性:陰離子
固含量:55%±1
三.特性:
PU0375-6立體水性墨白(雙組份):立體感強,觸邊性好,高附著力,高亮光,抗回粘性能優,表面光滑,耐水解一般,耐曲折
PU0375-6立體水性墨透(雙組份):立體感強,觸邊性好,高附著力,高亮光,抗回粘性能優,表面光滑,耐水解一般,耐曲折
四.注意事項:
1、自然干燥時間與氣溫和空氣濕度有關。
2、調色可根據客戶需要顏色的深淺來調入色種的分量,顏色調入太多容易引起掉色現象,色種最好控制在5%之內
3、如印容易掉色的深色布,需要測試顏色是否會升華到膠漿表面上,以減少不必要的損失
4、使用本透明產品印花,要稍加白膠漿摻和進行調色印花有利于在紡織品面料上印花著色度飽和,更好發揮透明漿的應用效果
5、由于印花面料的多樣化,和一些外在的不確定因素做大貨之前先小樣實驗確定以后方可批量生產。未確定情況使用或操作不當引起的質量問題本公司概不負責.
Otherdetailedinformation
Brand |
Conghui |
Model |
0375-6 |
color |
|
Colorstrength |
100% |
Singlenetweight |
25KG/20KG |
substrates |
Cotton,polyester |
一.Substrates
.Shoe material、cotton、lycra、denim、Nylon、TPU、PU leather and so on.
二、Appearanceandcomposition
Appearance:whiteviscousbody
Maincomponent:specialresin,titaniumdioxide
PHValue:7-8
Brinellviscosity:160000-180000CPS
Ionic:anion
Solidcontent:55%±1
三.Charactersandoperationtechnology
PU0375-6 stereo waterbased ink white(two -component):high stereoscopic,good edge,high adhesion,high glossiness,non-after tack,smooth surface,general wash fastness,resistance to folding.
PU0375-6 stereo waterbased ink clear (two- component):high stereoscopic,good edge,high adhesion,high glossiness,non-after tack,smooth surface,general wash fastness,resistance to folding.
四.Notes:
1.Thetimeofnaturaldryingisrelatedtotemperatureandhumidityoftheair.
2.Adjustcolorcouldaccordingtothecustomers’requirementsofshadeandaddthedifferentamountofpigments,ifaddtoomuchcolorwillleadtofadephenomenon.Therangeofpigmentsshouldbebetterwithin5%.
3.Ifprintonsomedarkclothwhicheasytofade,youwouldbettermakeatestthatcolorwhethersublimateonthesurfaceofpasteinordertoreduceunnecessarycosts.
4.Usingthisclearprintingproduct,youshouldaddsomewhitepastetoadjustcolor.Inthisway,itisbeneficialtoprintonfabricandprovidefullnessofcoloringandachievetheapplicationeffectbetter.
5.Duetothevarietyoffabricsandsomeuncertainfactors,itisbettertomakeatestbeforeinabatchproduction.Ifusingoroperatinginsomeuncertaincondition,ourcompanywilldonotresponsibleforqualityproblem.