一、適用
◇牛仔布(涂層布,壓光布除外)、硅油布、尼龍布、TPU、PU皮革等。
二、性能指標
◇外觀及組成:白色(半透明)狀粘稠體,聚氨酯聚合物
◇布氏粘度:120000~140000CPS
◇PH值:7-8
◇離子類型:陰離子
◇固體含量:50±1
三、特性
牢度超強、抗污染性好、高光澤、耐強石磨洗、雪花洗、漂洗、酵素洗、酸洗、耐高溫蒸煮。免過熱型,高附著力。耐黃變.常溫下保存12個月,(避免45℃以上高溫)屬于環保型。(雙組份)。
PUA833-2A牛仔漿白:牢度超強,抗污染性好,高光澤,遮蓋力強,水洗牢度好
PUA833-2B牛仔漿透:牢度超強,抗污染性好,高光澤,遮蓋力強,水洗牢度好
四、參考配方
調深色 |
調淺色 |
||
CH-833A牛仔白膠漿 |
20% |
CH-833A牛仔白膠漿 |
40% |
CH-833B牛仔透明漿 |
80% |
CH-833B牛仔透明漿 |
60% |
色漿 |
3-5% |
色漿 |
3-5% |
1008免烘固化劑 |
3% |
1008免烘固化劑 |
3% |
五、注意事項
由于牛仔面料多種多樣,在印花之前需要先行測試。在有涂層的布料上印花,需要測試布料涂層跟PU體系的粘結強度.。未確定情況使用或操作不當引起的質量問題本公司概不負責
Other detailed information
Brand |
Conghui |
Model |
833 |
Viscosity |
120000-140000CPS |
PH Value |
7-8 |
Odor |
/ |
Strength |
100T |
Fineness |
/ |
Appearance |
/ |
Usage |
/ |
Color strength |
100% |
Fluidity |
/ |
Shelf life |
12months |
Single net weight |
5KG |
Resin type |
/ |
Ionic |
anion |
Appearance color |
/ |
一.Substrates
Denim(coated fabric, press polishing fabric), silicone , Nylon,TPU and PU leather.
二.Performance and indicators
Appearance and composition: white (clear)viscous body, polyester
Brinell viscosity:120000-140000CPS
PH value:7.0-8.0
Ionic:anion
Solid content:50%±1
三.Features
Super fastness,good pollution-resistant,high glossiness,resistance to stone ,snow,bleach,enzyme,acid wash and high temperature steaming.Over-flashing,high adhesion.resistance to yellowing,the shelf life is 12 months at normal temperature,(avoid temperature over 45℃),belongs to environmental product.(two-component).
PUA833-2A Denim base white:Good fastness,excellent performance of anti-pollution,high glossiness,good covering power,good wash fastness.
PUA833-2B Denim base clear:Good fastness,excellent performance of anti-pollution,high glossiness,good covering power,good wash fastness.
四.
Dark |
Light color |
||
CH-833A denim white paste |
20percent |
CH-833A denim white paste |
40percent |
CH-833B denim clear paste |
80percent |
CH-833B denim clear paste |
60percent |
Paste |
3-5percent |
Paste |
3-5percent |
1008avoid drying curing agent |
3percent |
1008avoid drying curing agent |
3percent |
五.Notes
1.Due to variety of fabric and some uncertain factors , you should make a test before print on fabric,if prints on coated fabric,should make a test about strength between coated fabric and PU system.Using or operating in uncertain condition,our company is not responsible for quality problem.